KSTAR C&I Hybrid-Wechselrichter
Unterstützte Geräte
| Device Type | Variants | Modbus TCP (Ethernet) | RS485 | Curtailment | Minimum device firmware version |
|---|---|---|---|---|---|
| BluePulse Hybrid Inverter | KAC50DP-BC100DE | ✅ | ✅ | ✅ | V000B060D000 |
| KAC50DP-BC107DE / KAC50DP-BC107DE2 | |||||
| KAC50DP-BC197DE / KAC50DP-BC197DE2 |
Verkabelung
Die SmartgridOne Controller und die KSTAR-Wechselrichter kommunizieren über Ethernet oder RS485.
Ethernet
Für eine korrekte Ethernet-Verkabelung: Folgen Sie den Richtlinien für Ethernet-Verkabelung.
RS485
Konfiguration
Warnung
NOTE: RS485 Device Addresses
- You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
- Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
- For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.
Last updated February 18, 2026Edit this page