DEYE | SmartgridOne Documentation

EnheterPV hybrid and battery inverters

Stödda Enheter

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment
Enfas LV Hybridväxlare (SG0XLP1-EU)	SUN-3/3.6/5/6/7/7.6/8/10/12K	❌	✅	❌
Trefas LV Hybridväxlare (SG0XLP3-EU)	SUN-3/4/5/6/8/10/12/14/15/16/18/20K
Trefas HV Hybridväxlare (SG0XHP3-EU)	SUN-5/6/8/10/12/15/20/25/29.9/30/35/40/50/60/70/75/80K
Enfas Strängväxlare (G0XP1-EU)	SUN-1/1.5/2/2.2/2.5/2.7/3/3.3/3.6/4/4.2/4.6/5/5.2/6/6.2/7/7.5/8/9/10/10.5K
Trefas Strängväxlare (G0XP3-EU)	SUN-3/4/5/6/7/8/9/10/12/15/18/20/22/23/25/30/35/36/40/45/50/60/70/75/80/90/100/120/125/130/135/136K

Koppling

DET Power PV, Hybrid och Batteriinverter

Previous Page

Diehl-Ako

Next Page

On this page

Stödda Enheter Koppling RS485 Konfiguration

RS485 Wiring

For correct RS485 wiring: Follow the guidelines for RS485 wiring.
If the wiring shown in the table below is incorrect, please let us know.
There is no general consensus in the industry about the usage of A and B for the RS485 polarity, so it may be counterintuitive and opposite of what you might expect for some devices.

Device	SmartgridOne Controller model OM1	SmartgridOne Controller model IG8	RS485-USB converter	RS485-Ethernet converter
Pin 1 / Modbus-485_B	RS485 A	RS485_POS	RS485 A	TX+
Pin 2 / Modbus-485_A	RS485 B	RS485_NEG	RS485 B	TX-
Pin 3 / GND_485	RS GND	GND	Not available	G

DEYE | SmartgridOne Documentation