Solis On Grid Omvormers

Ondersteunde Apparaten

Device Type	Modbus TCP (Ethernet)	RS485	Curtailment
S5-GR3P(3-20)K	✅ (alleen met Solis datalogger)	✅	✅
S5-GC(25-40)K
S5-GC(50-60)K
S5-GC80K
S5-GC(100-110)K
S6-GR1P(0.7-3.6)K-M
S6-GR1P(2.5-6)K
S6-GR1P(7-8)K02-NV-YD-HC
S6-GC3P(40-60)K-NV-ND
S6-GC(80-125)K
S6-GC3P150K07-NV-ND
S6-GU350K-EHV
100-125K G5	experimenteel
Solis-80K-5G-PRO	✅ (alleen met Solis datalogger)
Solis-255K-EHV-5G-PLUS	✅ (alleen met Solis datalogger)

Bedrading

RS485

NOTE: RS485 Device Addresses

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.

Model	Pagina
S5-GR3P(3-20)K	Bedrading configuratie voor S5/S6 Series
S5-GC(25-40)K
S5-GC(50-60)K
S5-GC80K
S5-GC(100-110)K
S6-GR1P(0.7-3.6)K-M
S6-GR1P(2.5-6)K
S6-GR1P(7-8)K02-NV-YD-HC
S6-GC3P(40-60)K-NV-ND
S6-GU350K-EHV
100-125K G5	Bedrading configuratie voor Industriële PV-installatie
Solis-80K-5G-PRO
Solis-255K-EHV-5G-PLUS

Standaard is de omvormer ingesteld op adres 1. Dit kan worden gewijzigd via het display van de omvormer. U kunt de procedure vinden in hoofdstuk 7.3.2 van de handleiding.

Solis On Grid Omvormers

Ondersteunde Apparaten

Device Type	Modbus TCP (Ethernet)	RS485	Curtailment
S5-GR3P(3-20)K	✅ (alleen met Solis datalogger)	✅	✅
S5-GC(25-40)K
S5-GC(50-60)K
S5-GC80K
S5-GC(100-110)K
S6-GR1P(0.7-3.6)K-M
S6-GR1P(2.5-6)K
S6-GR1P(7-8)K02-NV-YD-HC
S6-GC3P(40-60)K-NV-ND
S6-GC(80-125)K
S6-GC3P150K07-NV-ND
S6-GU350K-EHV
100-125K G5	experimenteel
Solis-80K-5G-PRO	✅ (alleen met Solis datalogger)
Solis-255K-EHV-5G-PLUS	✅ (alleen met Solis datalogger)

Bedrading

RS485

NOTE: RS485 Device Addresses

You MUST give each device on the RS485 bus a unique address. Check the manual of the device on how to do this.
Use lower addresses first (1, 2, ...) because the SmartgridOne Controller will find them faster!
For each device, it is generally recommended to stick with the factory default baud rate, parity, and stop bits. The SmartgridOne Controller will scan on those first.

Model	Pagina
S5-GR3P(3-20)K	Bedrading configuratie voor S5/S6 Series
S5-GC(25-40)K
S5-GC(50-60)K
S5-GC80K
S5-GC(100-110)K
S6-GR1P(0.7-3.6)K-M
S6-GR1P(2.5-6)K
S6-GR1P(7-8)K02-NV-YD-HC
S6-GC3P(40-60)K-NV-ND
S6-GU350K-EHV
100-125K G5	Bedrading configuratie voor Industriële PV-installatie
Solis-80K-5G-PRO
Solis-255K-EHV-5G-PLUS

Standaard is de omvormer ingesteld op adres 1. Dit kan worden gewijzigd via het display van de omvormer. U kunt de procedure vinden in hoofdstuk 7.3.2 van de handleiding.

Solis On Grid Omvormers

Ondersteunde Apparaten

Bedrading

RS485

NOTE: RS485 Device Addresses

On this page

Solis On Grid Omvormers

Ondersteunde Apparaten

Bedrading

RS485

NOTE: RS485 Device Addresses

On this page