Dysun Energy | SmartgridOne Documentation

Dysun Energy | SmartgridOne Documentation

Devices Pv Hybrid And Battery Inverters

Supported Devices

Device Type	Variants	Modbus TCP (Ethernet)	RS485	Curtailment
Hybrid inverter	Dysun Hybrid	✅	✅	❌
FlexAmp	FlexAmp One 3.6K, FlexAmp One 5K	❌	✅	✅

Wiring

Modbus TCP

Connect the inverter's LAN port to your local network.
Default port: 502.
The Modbus unit ID must be set between 1–247 (default 1).

Dyness

Previous Page

Ecosourcen

Next Page

On this page

Supported Devices Wiring Modbus TCP RS485 Configuration FlexAmp Series Setup Control Dysun Hybrid

RS485 Wiring

For correct RS485 wiring: Follow the guidelines for RS485 wiring.
If the wiring shown in the table below is incorrect, please let us know.
There is no general consensus in the industry about the usage of A and B for the RS485 polarity, so it may be counterintuitive and opposite of what you might expect for some devices.

Device	SmartgridOne Controller model OM1	SmartgridOne Controller model IG8	RS485-USB converter	RS485-Ethernet converter
RS485-A	RS485 A	RS485_POS	RS485 A	TX+
RS485-B	RS485 B	RS485_NEG	RS485 B	TX-
GND	RS GND	GND	Not available	G