Schneider Electric SunEzy Inverters
Supported Devices
| Device Type | Variants | Manual | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|---|---|
| SunEzy 2000 / 2800 / 4000 | Single-phase string inverters | Manual | ❌ | ✅ | ❌ |
| SunEzy 400E | Transformerless single-phase inverter | Manual | |||
| SunEzy 600E | Transformerless inverter, triple MPP input | Manual |
Wiring
RS485 Connection
For most SunEzy models (2000 / 2800 / 4000 / 400E / 600E):
RS485 Wiring
- For correct RS485 wiring: Follow the guidelines for RS485 wiring.
- If the wiring shown in the table below is incorrect, please let us know.
- There is no general consensus in the industry about the usage of A and B for the RS485 polarity, so it may be counterintuitive and opposite of what you might expect for some devices.
| Device | SmartgridOne Controller model OM1 | SmartgridOne Controller model IG8 | RS485-USB converter | RS485-Ethernet converter |
|---|---|---|---|---|
| RS485 A (+) | RS485 A | RS485_POS | RS485 A | TX+ |
| RS485 B (-) | RS485 B | RS485_NEG | RS485 B | TX- |
| Shield / GND (optional) | RS GND | GND | Not available | G |
معلومات
SunEzy inverters using RS232 (DB9 interface) can be connected via an RS232-to-RS485 converter when required.